Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Enterprise Homeowners
Enterprise homes take a beating from the desert sun. Hardwood near a west-facing window fades, dries, and starts to show every scratch as the finish thins, and floors that looked warm and rich a few years ago can end up gray and dull. Refinishing is how you bring them back instead of tearing them out. Our technicians have up to 9 years of experience sanding, staining, and recoating hardwood, and they work with the nine brands you’ve probably been comparing, including Shaw, Mohawk, and Karndean. Most refinishing projects start with a free in-home measure and written estimate, and we can often get a technician out the same day to look at your floor. Call (844) 320-5894 to get started.
What Our Hardwood Floor Refinishing Service Includes
Refinishing isn’t one job, it’s a set of jobs that get matched to the condition of your floor. Some homes need a full sand-down. Others just need a fresh coat to wake up a tired surface. We’ll tell you which one yours needs at the estimate, and the written price lays out exactly what’s included before anyone touches a board.
Hardwood Floor Sanding
Sanding strips the old finish and the top layer of wood so the new finish has something clean to bond to. You need it when the finish is worn through in traffic lanes, when there are deep scratches that won’t come out with a screen, or when the color has gone uneven from sun exposure. We sand in stages with progressively finer grits, then vacuum and tack the floor before any finish goes down so dust doesn’t get trapped in the new coat.

Hardwood Floor Staining
Staining is how you change your floor’s color, whether that means going darker, lighter, or warmer. You’d want it during a full refinish when the current tone feels dated or clashes with new cabinets and paint. We test stain on a small area of your actual floor first, because the same stain looks different on oak than it does on maple, and we walk you through samples before we commit to the whole room.

Hardwood Floor Restoration
Restoration covers floors with real damage: water staining, pet accidents, dents, and boards that have lifted or cupped. You need it when the floor has problems beyond the surface finish. We look at the condition of the boards first and tell you honestly what can be brought back and what needs attention before refinishing can go ahead, since finish won’t fix a structural problem underneath it.

Hardwood Floor Buffing
Buffing smooths and scuffs the top layer of finish so a new coat grips without sanding down to bare wood. It’s the right call when the wood itself is in good shape but the finish has lost its sheen or has light surface scratches. It’s the least invasive option we offer, and for a floor that just looks tired, it’s often all you need.
Screen and Recoat Hardwood Floors
A screen and recoat is a light abrasion followed by a fresh coat of finish over the existing one, done without stripping the floor to bare wood. It’s ideal for floors where the finish is dull but not worn through and the color is still what you want. We check first that the existing finish is compatible with what we’re putting on top, because a recoat over the wrong finish will peel.
Stair Refinishing
Stairs rarely match the rest of the floor after a few years, since treads take far more foot traffic and often get carpet or runners pulled off at some point. Refinishing stairs means sanding and finishing each tread and riser to match the surrounding floor. We handle the details that make stairs look intentional: consistent color from step to step, clean edges, and a finish that holds up to daily use.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
We work with hardwood floors regardless of what’s on them. The brands in our portfolio span the whole spectrum of flooring, from Shaw and Mohawk engineered and solid hardwood to Karndean’s luxury vinyl that sits in rooms where you’d rather not install real wood. When you refinish, you’re working with what’s already in your home, and we’ll tell you what that floor needs based on how it’s built, not whose name is on the box it came in. Many homes in Enterprise only show their sun damage on the western side of the house, and we take that into account when we assess a refinish.
For rooms where wood isn’t practical, a water-resistant option like COREtec can be a reasonable alternative, and we’ll be honest if that’s the better path for a particular space. Whether you have Shaw, Mohawk, Karndean, COREtec, or any other make, we can help you decide whether to refinish or replace. It’s a conversation, not a sales pitch.
Signs You Need Hardwood Floor Refinishing Right Now
Desert climate makes hardwood age differently than it does in humid regions. Low humidity pulls moisture from the wood in winter, and intense sun through a window can bleach a finish faster than foot traffic ever would. These are the signs worth acting on:
- Dull finish that won’t come back with a mop. If the surface looks flat even after cleaning, the top coat has worn thin. Refinishing now protects the wood before the wear reaches the grain.
- Gray or faded patches near windows and doors. UV exposure breaks down the finish and bleaches the wood underneath. A refinish with a fresh coat restores the color and adds a layer that slows further fading.
- Scratches you can feel with a fingernail. Surface scuffs are normal; scratches deep enough to catch a nail mean the finish is breached. Once water reaches bare wood, damage moves faster and costs more to fix.
- Cupping, lifting, or dark stains. These point to moisture getting into the boards, often from a leak or a spill that sat too long. It’s worth having someone look before refinishing, since the underlying problem needs to be addressed first.
- Squeaks and visible separations between boards. Some movement is normal in a dry climate, but widening gaps or flexing boards can signal a floor that needs attention before a new finish goes down.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and estimate. We walk the floor with you, check for damage, look at how much wood thickness is left, and talk through color options. You get a written estimate with the scope spelled out, and no work starts until you approve it.
- 2
Prep and protection. We move what needs moving, seal off doorways, and set up dust containment. Sanding generates fine dust no matter how good the equipment is, so we plan for it before we start rather than cleaning up after.
- 3
Sanding to bare wood. We run through the grits in stages, checking the surface under raking light to catch swirl marks and low spots. Edges and corners get hand-worked so they match the field of the floor. Stairs, if they’re part of the project, get the same treatment.
- 4
Stain and finish. If you’re changing color, we test the stain first and confirm it with you before the whole floor gets it. Then the finish goes down in coats, with sanding between coats, and we check for dust nibs and uneven sheen as we go.
- 5
Final walkthrough. We do a last inspection with you, point out anything you should watch for as the floor cures, and leave you with care instructions. The written estimate sets the final price, so there are no surprises on the invoice.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Enterprise?
Hardwood floor refinishing in Enterprise typically runs $1,800 – $5,000 for a 500 to 800 square foot project, and the range covers the full scope: sanding, staining if you want it, and finish coats. A lighter job, like a screen and recoat on a floor in decent shape, lands toward the lower end, while a full sand-down with a color change and stair refinishing pushes toward the upper end. Hardwood refinishing starts from about $3 per square foot, though the final figure depends on the condition of the wood, how much furniture has to move, how many rooms are involved, and whether stairs are included. Homes with heavy sun damage or deep wear take more sanding passes, which affects the labor line.
| Service | Typical estimated range |
|---|---|
| Screen and recoat / buffing | Lower end of $1,800 – $5,000 |
| Full sand, stain, and finish | Middle to upper end of $1,800 – $5,000 |
| Refinish with stair refinishing | Upper end of $1,800 – $5,000 |
You avoid overpaying by getting a written scope, not a verbal ballpark. Our estimate is free, it’s itemized, and it tells you what’s included before you commit. If a contractor won’t put the scope in writing, that’s your signal to keep looking. Call (844) 320-5894 to schedule your free estimate.
Hardwood Floor Refinishing Near Enterprise – Our Service Area
We work throughout the Las Vegas Valley, and homes in Enterprise are close enough that scheduling a measure is simple. We also reach Spring Valley, Boulder City, Paradise, Summerlin, Winchester, Henderson, Whitney, Sunrise Manor, Las Vegas, North Las Vegas, and Sandy Valley. Response times depend on where you are and what’s on the schedule that week, and we’ll give you a realistic window when you call rather than a number we can’t keep. Refinishing is a scheduled job: a free measure and estimate first, a written price, then a booked install day. For the full picture of what we do, start at Floors Enterprise.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Enterprise
Hardwood floor refinishing is the process of sanding away the old finish, and sometimes the top layer of stained wood, then applying a new stain and protective finish to the existing floor. It restores the floor you already have instead of replacing it. We offer it as a dedicated service alongside our carpet installation and tile flooring installation work, so a whole-home project can run through one specialist. The right approach depends on the thickness of your wood and its condition, which we check at the estimate visit.
The schedule is set at the estimate, because it depends on the square footage, how many coats the finish needs, and whether stairs or multiple rooms are involved. A single room moves faster than a whole house, and a screen and recoat takes less time than a full sand-down. We’ll give you a realistic timeline in writing before work begins. Call (844) 320-5894 for an exact quote – estimates are free.
Typical estimated prices run $1,800 – $5,000 for a 500 to 800 square foot project, and the written estimate sets the final price. Hardwood refinishing starts from about $3 per square foot, with the total depending on the condition of the wood, the finish you choose, and whether stairs are included. We provide a written, itemized estimate so you can see exactly what you’re paying for. Call (844) 320-5894 to schedule yours.
Yes. We refinish hardwood floors regardless of the brand, and we work with Shaw, Mohawk, Karndean, and COREtec as part of our nine-brand portfolio. Refinishing is about what your floor is made of and how it’s held up, not the name on the carton. If you’re not sure what you have, we can help identify it at the estimate. Call (844) 320-5894 to set that up.
Same-day visits are often possible for the measure and estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. The refinishing itself is a scheduled job, so the work date gets set once you’ve approved the written estimate. Call (844) 320-5894 to get on the schedule.
Warranty details are set in your written estimate, and we’ll walk you through them before you sign anything. Manufacturer coverage on the finish depends on the product used, and we don’t make promises beyond what’s in writing. What we can tell you is that the written estimate spells out the scope and the terms so there’s no ambiguity later. Call (844) 320-5894 with questions.
Clear furniture and anything breakable from the rooms being refinished, and expect to stay off the floor while it cures. We’ll tell you the specific prep at the estimate based on your layout and how many rooms are involved. Dust containment is part of the job, but fine dust still travels, so covering what matters in adjacent rooms is worth the effort. Call (844) 320-5894 and we’ll go over it together.
Schedule Your Hardwood Floor Refinishing Service in Enterprise Today
If your hardwood has gone dull, faded, or scratched, a refinish can bring it back for a fraction of what replacement costs. We offer free estimates, written quotes, and upfront pricing, and our technicians have up to 9 years of experience with floors like yours. Call (844) 320-5894 to schedule your no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Floors Enterprise.